Request a Quote

Impact Resistance Gloves

Hi-Vis Impact Resistant Industrial Gloves

Leather palm & pad
A white leather palm with a padded patch that cushions the heel of the hand where it meets tool handles.
Hi-vis fabric back
Fluorescent yellow fabric on the back of the hand keeps hand movements easy to see.
TPR impact guards
Moulded TPR guards run across the knuckles, fingers and thumb.
Wrist closure
An adjustable strap holds the cuff in place.
Designed for
Jobs where knocks, pinch points and poor light come with the work, such as rigging, equipment maintenance and site operations.
For your brand
A familiar impact-glove format for safety distributors and private-label brands, developed and supplied under your own name.
Front + back

← → to browse · Click photo to magnify · Esc to close

Key features

What the design brings to the job

TPR Impact Guards

Moulded thermoplastic rubber covers the knuckles and runs along each finger in short, separated ribs. Because the guard is segmented, the back of the hand can still bend when you close your grip.

High-Visibility Back

Fluorescent yellow fabric on the back and sides makes hand movements easier to pick out around machinery, on busy sites and in poorly lit work areas.

Padded Leather Palm

The white leather palm carries a stitched, perforated pad across the heel of the hand, adding a cushioning layer between the palm and hard tool handles.

Fingertip & Thumb Coverage

Textured TPR caps sit over the fingertips, and the thumb has its own guard and leather overlay. These are the areas that usually make first contact when gripping and handling.

Adjustable Wrist Strap

A strap with a moulded tab closes the cuff around the wrist, so the glove stays in position through repetitive gripping and can be adjusted to the wearer.

Brand-Ready Details

The wrist tab, woven side label and packaging give your logo clear, natural positions, so the glove can carry your brand without changes to its construction.

Industrial applications

Where this glove can be used

Potential applications for an impact glove of this type. Suitability always depends on the hazards of each task, so confirm it through your own risk assessment and any testing your market requires.

  • Oil & gas operations

    Pipe handling, rig-floor tasks and general maintenance where hands work close to heavy equipment.

  • Construction

    Formwork, scaffolding and material moving on sites where visibility and knock protection are both useful.

  • Mining

    Equipment servicing and general handling in low-light areas, alongside your site's own PPE requirements.

  • Heavy equipment maintenance

    Workshop and field repairs on plant and machinery. For lighter, more dexterous jobs, see our mechanic gloves.

  • Material handling

    Loading, lifting and moving parts or stock where hands meet edges, frames and pallets.

  • Manufacturing & logistics

    Production lines, warehouses and yards where a visible, padded glove suits repetitive handling.

OEM & private label

Produced under your brand

LEATHER WORLD works with PPE brands, industrial safety distributors, importers, wholesale buyers and private-label work-glove companies. This model can be supplied with your branding, or used as the starting point for a version developed to your own specification.

  • Logo placement on the wrist tab and glove
  • Woven labels, size labels and hang tags
  • Packaging and carton markings
  • Material and colour changes reviewed during development
  • Pattern and size range set to your specification

See our OEM and private-label services for the full range of development options.

  1. 01

    Share your requirements

    Send the target quantity, size range, branding and any market requirements, with reference photos or a sample if you have one.

  2. 02

    Specification review

    We review materials, construction and branding with you and agree what the sample should show.

  3. 03

    Sample & approval

    You check the sample for fit, construction and branding. Changes are recorded before the reference sample is approved.

  4. 04

    Bulk manufacturing

    Production follows the approved sample, with checks on stitching, dimensions and labelling agreed in advance.

Product & ordering information

Specification at a glance

Product typeHi-vis impact-resistant industrial work glove
PalmWhite leather with a padded, perforated palm patch
BackHi-vis yellow fabric, with fabric finger gussets
Impact componentsMoulded TPR knuckle guard, finger ribs, fingertip caps and thumb guard
Wrist closureAdjustable strap with moulded brand tab
SizesSize range agreed per order (see the size guide)
CustomisationBranding, labels, packaging, materials and design development
Branding optionsWrist tab, woven label, hang tags, packaging and cartons
MOQDepends on design, materials and branding; confirmed with your quote
Sample developmentAvailable; timing confirmed when the specification is agreed
Bulk productionLead time confirmed after sample approval, based on quantity

Performance ratings are not stated for this model. If your market requires testing to a specific standard, include it in your inquiry.

Buyer questions

Frequently asked questions

What is the minimum order quantity for this glove?

It depends on the version you need. A branded standard model and a glove with new materials or a changed TPR layout have different set-up requirements, so the MOQ is confirmed in your quotation.

Can the glove be produced under our own brand?

Yes. Your logo can go on the wrist tab and woven label, and the hang tags, size labels and cartons can follow your artwork. Placement and size are agreed on the sample before production.

Can we see a sample before placing a bulk order?

Sample development is part of every project. The sample is used to check fit, construction and branding, and it becomes the reference for bulk production once you approve it.

How long does bulk production take?

Lead time is set after sample approval and depends on the order quantity, the materials involved and the level of branding. We confirm it in writing before production starts.

Can the materials, colours or guard layout be changed?

Changes can be reviewed during development, for example a different back colour, palm material or lining. Each change is checked on a new sample so the approved version reflects exactly what will be produced.

Do you provide test reports or certification for this model?

No ratings are claimed for this model at present. If your market requires testing to a particular standard, tell us at the inquiry stage so the testing and documentation can be planned as part of the project.

Develop your next impact protection glove with Leather World

Whether you are a PPE brand, importer or distributor, share the specification and quantities you have in mind, or start from this model. We will review your requirements and suggest the next step toward a sample.

Request an OEM Quote →

Browse the impact resistance glove range or the full work glove collection.